|
|
 |
Case
Clamp |
| Concept
Eco & Concept Primus |
| The Concept Eco and Concept Primus
are the ideal assembly support for dowel construction at the case
goods as well as drawer production. |
| • |
With workpiece tolerance compensation
(System GANNOMAT) |
| • |
2 Potentiometer for stepless
adjustable pressing force |
| •
|
Pressing force min. 300/500
daN (kg) at Concept Eco resp.
Pressing force min. 600/800 daN (kg) at Concept Primus |
| •
|
Pressing force max. 2200
daN (kg) at Concept Eco resp.
Pressing force max. 3500 daN (kg) at Concept Primus |
| •
|
3 Pressing velocities and
adjustment rates
5 /10 / 25 mm/sec. (with fine positioning / creep feed) |
| • |
Adjustable clamping cycle
time with automatic opening |
| • |
Concept Eco: Simple operation
by 6 individual push buttons for 8 motion sequences |
| • |
Concept Primus: Simple operation
by controller with display |
| Universeller
Einsatzbereich: |
| •
|
Case good e.g. for furniture and
cabinets |
| •
|
Cabinets with 45 degree mitres |
| •
|
Cabinets with over-lapping tops |
| •
|
Pressing of several case goods
/ drawers |
| • |
Proved in practice workpiece tolerance
compensation (GANNOMAT system) |
| • |
Electromechanical case clamp with
frequency-controlled geared motors |
| • |
Independent vertical and horizontal
clamping beam |
| • |
Long service life through proven
and high-quality components |
| • |
Construction in solid and robust
design |
| • |
Case good clamping = simple +
fast + efficient + flexible + precise + professional |
| • |
Simple through easy and practical
control panel |
| • |
Fast through clamping beam positioning
speed of up to 50 mm/sec (option) |
| • |
Efficient through precise pressing
of different case good sizes |
| • |
Flexible through adjustable parameters
such as, pressing force, pressing time, travel speeds |
| • |
Precise through accurate angle
pressing of furniture case goods and drawers |
| • |
Professional production of case
goods and drawers using modern case clamp |
| • |
Working height as required |
| • |
Adjustment speed up to 50 mm/sec |
| • |
Case good measurement through
sensors for automatic switching between adjustment / pressing speed |
|
GANNOMAT Concept interlocking
lamellar case clamp |
|
The Gannomat Concept case clamps
are the ideal assembly support for dowel construction at the case
goods as well as drawer production at the furniture production. |
|
This multi-purpose case clamp
with interlocking vertical and horizontal pressure beams, is specially
designed for efficient and flexible use to save time and labour in
medium and large production plants. The clamping pressure is applied
across the entire vertical and horizontal beams for clamping of case
goods, drawers, etc.. |
|
A Gannomat case clamp is suitable
for the production of any kind of cabinets, case goods and drawers,
and offers all advantages of a well-equipped case clamp, adapted to
the production of just in time production with batch size 1, as well
as small, medium and large volumes. A quick assembling and pressing
of furniture is given and is featured by a space saving layout design,
with makes the integrated into production sites easy. |
|
Gannomat Concept case clamps are
designed for a professional pressing of case goods. The case clamp
can press different sizes of cabinets with an automatic detection
of the furniture size through an optical system for the automatic
changeover of the adjustment / pressing speed (option). |
|
